Automatic Changeover Switch

230V relay energised by higher priority source.  When active the interal wiring is switched onto  that supply (typically inverter).  The relay is fully rated at 20A switching and is housed in a compact box.

Length: 130mm, Width: 130mm, Height: 75mm.

Manual Changeover Switch

This is switch is designed to be mounted into a control panel.  It has two poles rated at 20A to give manual selection between two alternative sources, with a centre off position.  The bezel is 48mm2 marked 1-0-2.  Panel cut out needed is 10mm with 4 screw 2 fixings concealed by the bezel.  Allow 45mm clearance behind the panel.

£25.00

Order Code:

CHG02