Power Master SL Combi combines a powerful pure sine wave inverter, a sophisticated battery charger (with adaptive charge technology), a solar panel regulator and a high-speed AC transfer switch all integrated into a single compact enclosure.
The pure sine wave output of the SL Combi means it will safely power all types of equipment, PC's, Laptops, Stereo's, DVD's, LCD TV's, etc...
In the event of a grid failure, or shore/generator power being disconnected, the inverter is automatically activated in less than 20 millisecond and takes over supply to the connected loads allowing them to continue to operate without disruption.
The battery charger can draw considerable power from the generator or shore supply and therefore the power sharing control is incorporated to automatically reduce the charger power when other loads are in use, thus preventing shoreline overload trips.
1500W Pure Sine Inverter, 35Amp Charger, Solar Regulator
£799
Price includes VAT, Delivery, DC Cables
Features
Inverter
Pure sine wave AC output Very low total harmonic distortion (< 2 %) High surge capacity (+100%) and soft-start design for heavy Inductive loads such as air conditioning, motors etc Selectable load detection system for “power saving” mode High efficiency using low frequency switching with large Toroidal output transformer.
Battery Charger
The SL Series is built around a bi-directional converter, that operates as an inverter or as a high capacity three-stage battery charger.
Power factor corrected for maximum efficiency Auto desulphation mode to condition battery for longer life Multistage charger with programmable voltages and timeout Temperature sensitive charging for additional care of all batteries (temperature
sensor optional) Built in 30 Amp solar charge regulator
Bypass Function
Automatic 30 A (3000W) / 15 A (1500W) transfer relay
Solar Regulator
30 Amp Solar charge regulator. Just plug in your solar panels!
Power Sharing
Adjustable power sharing automatically reduces charger power when other loads
increase to prevent tripping of shore power breaker
Auxilary Relay
Two separate relays with volt free contacts each independently programmable to
operate at set conditions e.g. overload, low voltage, bypass operating etc or for auto
generator start / stop.
Display
Front panel mimic display with control switches and LEDs showing selected operation
and active circuits LED 4 digit meter selectable DC voltage, AC voltage, Charge Amps and Mode and also
used during charge voltage programming LED bar graph for Charge current or Inverter output % load
Optional Remote Control
Power output on / off, Function mode select, Programming battery charging voltage,
Error message display, Programming auxiliary relay (x2), Programming input current
limit for power sharing
For a full technical specification please click here.
If you have any Techincal queries regarding these items then please do not hesitate
Pure sine wave AC output 
