RCCB - Residual Current Circuit Breaker to EN60898	£32.00
A standard DIN rail mounting two pole 30mA trip RCCD with 40Amp maximum capacity. Essential fitting for any on board mains installation. Protects YOU by sensing any imbalance in the currents in the Live and Neutral circuits caused by leakage to earth eg through YOU !! and then isolating both Live and Neutral circuits.
MCB – Main Circuit Breaker to EN60898	£4.00
Standard DIN rail mounting. Fit into Live side after the RCCB to allow individual switching of circuits and overcurrent protection. “C” trip curve suitable for general domestic appliances.Ratings 6A, 10A, 16A from stock – others to order.
12/24 VDC components
MCB – Main Circuit Breaker	£4.00
(Same design as mains unit). Particularly recommended to use for high current circuits as the rising cage clamp terminals allow use of conductors up to 40mm^2csa. “C” trip curve to EN60898 suitable for general short term high power equipment eg: macerator pumps, water pumps, fridges, small inverters etc. Ratings 6, 10, 16, 25, 40 and 63A from stock – others to order.
Visi Rocker Trip Switch	£3.75
A combined rocker switch with integral overcurrent trip. Snap in design for 28.5x13.5mm panel cutout. Black body with red ON indicator panel on rocker.The neatest way to build a control panel combining circuit switching and protection in one attractive body. Takes 0.250 type push on crimp terminals. Ratings 5, 8, 10, 15A. - others to order. Not recommended above 15A as suitable size conductors cannot be terminated on 0.250 crimps.
Push to Reset trip	£6.00
Old style through hole mounting trip with white indicator and push to reset. Fits 11mm dia hole. Takes 0.250 type push on crimps. Rating 10A – others to order.